LINEAR ELECTROMAGNETS
We produce a wide range of linear electromagnets, available for traction, thrust and traction plus thrust sectors. They are particularly suitable for drives in the industrial and civil sectors, but the application possibilities of linear electromagnets are almost unlimited. They are convincing with their low power consumption, long service life, maintenance-free operation and the fact that they can be installed in any position. We can offer you standard products of various features, sizes and accessories. In addition, we specialise in developing customised solutions according to customer requirements.
Linear electromagnet type 36
Linear electromagnet type 36 with single or double coil, for movements requiring high precision and offering a high pulling force, both in traction and thrust. Industrial diesel engines and motion sector in general.
- Power supply = 12 – 24Vdc – other
- Traction/thrust
- Type I36 single coil
- ED% duty = intermittent
- Type C36 and CI36 double coil:
- – pull coil – ED% duty = intermittent
- – hold coil – ED% duty = 100
- Pull coil disconnected by internal switch for type C36
- Pull coil disconnected by external switch for type CI36
- High pulling and holding forces
- Max. stroke = 20 mm
- Dimensions (diameter) = 36
EXTERNAL TIMED ELECTRONIC SWITCH TO BE APPLIED SSR70-5 and/or SSR70-6
CUSTOMISED VERSIONS AVAILABLE
Linear electromagnet type 42
Linear electromagnet type 42 with single or double coil, for high precision movements, offering a high pulling force, both in traction and thrust. Industrial diesel engines and motion sector in general.
- Power supply = 12 – 24Vdc – other
- Traction/thrust
- Type I42 single coil
- ED% duty = intermittent
- Type C42 and CI42 double coil:
- – pull coil – ED% = intermittent
- hold coil – ED% duty = 100- ED% duty = 100
- pull coil excluded from internal switch for type C42
- Pull coil disconnected by external switch for type CI42
- High pulling and holding forces
- Max. stroke = 30 mm
- Dimensioni (diametro) = 42
EXTERNAL SWITCH TIMED ELECTRONIC TO BE APPLIED SSR70-5 and/or SSR70-6
CUSTOMISED VERSIONS AVAILABLE
Linear electromagnet type 456
Linear electromagnet type 456 with single or double coil, for high precision movements, offering a high pulling force, both in traction and thrust. Industrial diesel engines and motion sector in general.
- Power supply = 12 – 24Vdc – other
- Traction/thrust
- Type I456 single coil
- ED% duty = intermittent
- Type C456 and CI456 double coil:
- – pull coil – ED% duty = intermittent
- hold coil – ED% duty = 100
- Pull coil disconnected by external switch for type C456
- Pull coil disconnected by internal switch for type CI456
- High pulling and holding forces
- Max. stroke = 26 mm
- Dimensions (diameter) = 45
EXTERNAL TIMED ELECTRONIC SWITCH TO BE APPLIED SSR70-5 and/or SSR70-6
CUSTOMISED VERSIONS AVAILABLE
Linear electromagnets type I
Linear electromagnet type I with single coil, designed for intermittent duty where high pulling force is required. Customisable with various accessories, ideal for both traction and thrust applications.
- Power supply = 12 – 24 Vdc – other
- Traction/thrust
- ED % duty = intermittent
- Single coil
- High pulling forces
- Max. stroke = 45 mm
- Dimensions (diameter) = 45 – 60 – 80 – 100
CUSTOMISED VERSIONS AVAILABLE
Linear electromagnet type C
Linear electromagnet type C with double coil offers not only a high pulling force, but also a holding function with continuous ED % duty=100%. Equipped with an INTERNALLY TIMED ELECTRONIC SWITCH, the pulling circuit is overridden when the core has completed its full stroke and acted on the internal switch.
- Power supply = 12 – 24 Vdc – other
- Traction/thrust
- Double coil :
- – pull coil – ED% = intermittent
- – hold coil – ED% duty = 100
- Pull coil disconnected by internal switch
- High pulling and holding forces
- Max. stroke = 45 mm
- Dimension (diameter) = 45 – 60 – 80 – 100
CUSTOMISED VERSIONS AVAILABLE
Linear electromagnet type CI
Linear electromagnet type CI with double coil offers not only a high pulling force, but also a holding function with continuous ED % duty=100%. By means of an EXTERNALLY TIMED ELECTRONIC SWITCH, both circuits can be operated with a 3-position switch. In the case of specific use as an “engine stop”, the cut-off of the pulling circuit takes place as soon as the starting phase has been completed. Customisable with various accessories, ideal for both traction and thrust applications.
- Power supply = 12 – 24 Vdc – other
- Traction/thrust
- Double coil :
- – pull coil – ED% = intermittent
- – hold coil – ED% duty = 100
- Pull coil disconnected by external switch
- High pulling and holding forces
- Max. stroke = 45 mm
- Dimension (diameter) = 45 – 60 – 80 – 100
EXTERNAL TIMED ELECTRONIC SWITCH TO BE APPLIED SSR70-5 and/or SSR70-6
CUSTOMISED VERSIONS AVAILABLE
Linear electromagnet type CS
Linear electromagnet type CS with single coil, ideal for movement with consecutive duty cycles and high motion precision, offering a constant force over the entire stroke in both traction and thrust. It can be used for continuous ED duty=100% or customised for intermittent duty cycles. Numerous customisations are available in terms of both coil features (power and voltage) and accessories (fastening, type of shaft, springs, etc.).
- Power supply = 12 – 24Vdc – other
- Traction/thrust – sliding on self-lubricating bushings
- ED% duty = 100
- Single coil
- Constant force throughout the stroke
- Max. stroke = 30 mm
- Dimensions (diameter) = 45 – 50 – 60 – 70 – 80 – 100
AVAILABILITY OF VERSION WITH INCREASED FORCE UP TO 10 mm STROKES
CUSTOMISED VERSIONS AVAILABLE
Linear electromagnet type CS 45 CH
Linear electromagnet type CS 45 CH with single coil, ideal for movements with consecutive duty cycles and high motion precision, offering a constant force over the entire stroke in both traction and thrust. It can be used for continuous ED duty=100% or customised for intermittent duty cycles. Numerous customisations are available in terms of both coil features (power and voltage) and accessories (fastening, type of shaft, springs, etc.).
- ED% duty = 100
- Single coil
- Spring return
- High insertion speed
- Max. stroke = 20 mm
- Dimensions (diameter) = 45
CUSTOMISED VERSIONS AVAILABLE
Linear electromagnet type CS 45 CH-FC with single coil, ideal for movements with consecutive duty cycles and high motion precision, offering a constant force over the entire stroke in both traction and thrust. It can be used for continuous ED duty=100% or customised for intermittent duty cycles.
Unlike other CS-type linear electromagnets, it is equipped with a position switch.
Numerous customisations are available in terms of both coil features (power and voltage) and accessories (fastening, type of shaft, springs, etc.).
- Power supply = 12 – 24Vdc – other
- ED% duty = 100
- Single coil
- Spring return
- High insertion speed
- Movement occurred indicator switch
- Max. stroke = 20 mm
- Dimensions (diameter) = 45
CUSTOMISED VERSIONS AVAILABLE
Linear electromagnet type CM with single coil, designed for small movements, offers a constant force over the entire stroke in both traction and thrust.
It can be used for continuous ED duty=100% or customised for intermittent duty cycles.
Numerous customisations are available, sizing of the electromagnet, electric coil (power and voltage), accessories (fastening, type of shaft, springs, etc.).
- Power supply = 12 – 24Vdc – other
- Traction/thrust
- ED% duty = 100
- Single coil
- Constant force throughout the stroke
- Max. stroke = 12 mm
- Dimensions = 25 – 30 – 40
CUSTOMISED VERSIONS AVAILABLE
Linear electromagnet type CM open frame
Linear electromagnet type CM open frame with single coil. Designed for small movements, offers a constant force over the entire stroke in both traction and thrust.
It can be used for continuous ED duty=100% or customised for intermittent duty cycles.
Numerous customisations are available, sizing of the electromagnet, electric coil (power and voltage), accessories (fastening, type of shaft, springs, etc.).
- Power supply = 12 – 24Vdc – other
- Traction/thrust
- ED% duty = 50 or 100
- Single coil
- Constant force throughout the stroke
- Max. stroke = 12 mm
- Dimensions = 25
CUSTOMISED VERSIONS AVAILABLE